tqdiltc tcxo corning frequency control ? worldwide data book 2001 v1.1 . 2002-01-03 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com corning frequency control gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.corningfrequency.de 1 / 2 typical applications features pcs base stations mechanical control (internal trimmer) land mobile radio efc optional cellular telephony standard 4-pin dip package radio in the local loop optional: surface mount package digital switching high stability frequency range 10 mhz ? 33 mhz standard frequencies 10; 13; 16.384; 19.44; 20; 25.92 mhz frequency stabilities parameter code i frequency stability operating temp range 07 2.0 ppm 08 1.0 ppm -40....+85 03 2.0 ppm 04 1.0 ppm -20....+70c 05 1.0 ppm vs. operating temperature range 06 0.5 ppm 0....50c parameter value condition vs. supply voltage change vs. load change vs. aging / year < 0.2 ppm < 0.2 ppm < 1.0 ppm v s 5% load 10% frequency tuning parameter option i value condition mechanical (no efc) blank > 3.0 ppm (internal trimmer) electrical freq. control (efc) > 5.0 ppm note 1 voltage range (vc) u 0.5 to 4.5 v @ v s =5.0 v 0.3 to 3.0 v @ v s = 3.3 v pulling slope positive freq. control input impedance >10 k w rf output parameter code iii value condition signal hcmos load 25pf 10% < 20mhz 15pf 10% 3 20mhz duty cycle 06 40/60% @ v s /2 supply voltage parameter code ii value condition supply voltage (v s ) 05 5v 5% current consumption < 3 ma clipped sinewave < 12ma hcmos supply voltage (v s ) 33 3.3 v 5% current consumption < 3 ma clipped sinewave < 6ma hcmos
tqdiltc tcxo corning frequency control ? worldwide data book 2001 v1.1 . 2002-01-03 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com corning frequency control gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.corningfrequency.de 2 / 2 additional parameters parameter value condition phase noise <- 95 dbc/hz 10 hz note 2 <-130 dbc/hz 100 hz <-140 dbc/hz 1 khz <-150 dbc/hz 10 khz <-150 dbc/hz 100 khz weight < 6 g operable temperature range -40 ...+90c storage temperature range -55 ...+105c processing & packing handling&processing note enclosure option i case condition type blank g125 a g175 drawing 0,8max. 0,5 0,5 12,2 4,58 0,3 0,3 15,24 20,7max. ?0,45 5,85min. h 7,62 13,1max. 4,8 3,0 2,3 option 14 8 7 1 h = 7,5max.; g125 standard g 125 0,1 15,24 22,7max. 15,1max. 1,8 13,2 h 0,1 0,1 18,5max. 0,2 10,9max. 0,1 3,0 2,3 4,8 option 14 8 7 1 g 175 h = 9,4; g175 standard pin 1 corner all units in mm pin connections pin 1 n.c. mechanical freq. control pin 1 voltage control (vc) option u electrical and mech. freq. control pin 2 gnd, case pin 3 rf output pin 4 supply voltage (v s ) ordering code option i option ii code i code ii code iii model frequency tuning enclosure frequency stability supply voltage rf output frequency example: tqdiltc u 04. 05. 06. 10m00000 order: tqdiltc notes 1 others available; option ?u? includes the mechanical frequ. control 2 typical values @ 10 mhz unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c) subject to technical modification; not all options are available at all frequencies
|
